Thursday, December 26, 2019

Employment at Will A Deeper Look into the Copious...

It is human nature to look out for one’s individual self-interests. This vested interest is what minimizes unjust treatment by other parties and ensures success. Leverage is priceless when presented with an unfair employment scenario. In the case of an employer and employee relationship, too much power on either side can quickly become detrimental. Balancing this power is no easy task and holds no single solution. In this essay, I will propose that the contract at will, or employment at will, is one viable solution that can legitimately benefit both the employer and the employee. My view on this issue is one that is often the minority, as there has been a significant amount of criticism over the contract at will. In a society that†¦show more content†¦from 1937 provided the first recognized exception to at will contracts. In this case, the court ruled that employers can hire and fire their employees at will, whether that be for good cause or for no cause, but not for an illegal cause. Essentially, employers could use at will contracts so long as it did not infringe upon employees’ protected rights (National Labor). Laws and doctrines such as Title VII of the Civil Rights Act of 1964, the Americans with Disabilities Act, and the Age Discrimination in Employment Act are all still applicable under at will contracts (Estlund). Just because an employee is employed at will does not mean they cannot bring a claim of unlawful termination or punishment under any of these statutes. For this reason, I see no substance to the argument that at will contracts provide no protection for the employee. There are even more employee protections outside of the employment laws I just mentioned. Several judicial and statutory exceptions to employment at will have been created to protect against wrongful punishment or discharge. The three main exceptions include the public policy exception, the implied contract exception, and the covenant of good f aith exception. The public policy exception essentially says that an employee will have a wrong discharge claim if that discharge clearly violates public policy or mandates. For example, an employer could not terminate an employee for serving jury duty or for filing a workersShow MoreRelatedThe Cane Toad : An Invasive Species Problem1561 Words   |  7 Pagesenvironment. This can add jobs to the economy as well as keeping things healthy for our planet (Williams). Population control is also a key factor to keeping this planet nourished. The matter of fact is that the population we currently have is too copious for our planet. A large population means a larger depletion of resources because everyone needs to eat and everybody uses energy, fossil fuels, during daily tasks since a green infrastructure is not yet set up in many areas of the world. There shouldRead MoreThe Field Of Health Economics1808 Words   |  8 Pagesbusiness, but it plays an especially large role at hospitals, where the stakes are especially high as far as employee job performance is concerned (human lives). There is a copious amount of literature that can be found on hospital structure, thus highlighting its utter importance in the medical field. It is important to take a look at the main â€Å"organizational forms† (as termed by Harvard Applied Economics Professor David Cutler) that hospitals fall under (Cutler). For-profit and not-for-profit areRead MoreGp Essay Mainpoints24643 Words   |  99 Pages(compared to citizen journalism) – content quality †¢ Citizen journalist â€Å"on-the ground† reports vs. professional whose sole purpose is to uncover each and every piece of information related to the news article they are writing †¢ Wider and deeper coverage †¢ Connections to a wider spectrum of professionals ( greater insight into issue at hand †¢ E.g. 2008 U.S. Presidential Elections (bloggers provide personal opinions about who was likely to win but New York Times invited experts toRead MoreCase Study148348 Words   |  594 Pagesto different topics as discussed above. The mixture and sequencing of lectures, seminars, case studies, group work, etc. These are largely determined by the circumstances for which the programme is designed as outlined in Section 3. It is useful to look at some typical ways in which this mix can be planned: †¢ Case study/applied material only courses, where the text is used as pre-reading and/or follow-up. This approach is not very common on open access courses but can be very useful in an in-companyRead MoreOcd - Symptoms, Causes, Treatment131367 Words   |  526 PagesClearly, family members are caught in a difficult dilemma. Regardless of whether they refuse to be drawn into the patient’s rituals or whether they accommodate to the rituals, they end up feeling the ill eff ects of living with OCD. Education and Employment Status At one time it was thought that individuals with OCD have higher intelligence and attain a higher level of education than individuals with other psychiatric disorders (e.g., Black, 1974). However, more recent empirical research indicates

Tuesday, December 17, 2019

Racism A Society Of Harmony - 1792 Words

When imagining a perfect society, the first thought that comes to a person’s mind is world peace. It is only a human belief that the world would be a better place without war and without sickness; it should be a society of harmony. There is a natural hope that despite any differences, the world can come together and overcome all obstacles. Though this goal may seem unrealistic, there are certain actions that can be taken that will bring mankind one step closer to peace. One major step to take is to eliminate racism. It is up to the parents of young children all across the world to help fight the war against racial discrimination. By exposing children to different races and cultures, being a positive visual influence, and guiding them to accept all humans as they are, parents are the key to ending racism. Racism is â€Å"a belief or doctrine that inherent differences among the various human races determine cultural or individual achievement, usually involving the idea that on e’s own race is superior and has the right to rule others† (â€Å"racism†). It is an instinctive trait for man to fear organisms that are different from him, thus making the birth of what is known as racism date back to the dawn of time when it was used as a survival mechanism. After years of scientific research, man uncovered the truth that all human bodies are the same regardless of their skin color, and began to pave a path towards eliminating racism. No one culture, ethnic group, or skin color isShow MoreRelated Community and Race Essay1415 Words   |  6 PagesSince community is a large society composed of a number of people with different backgrounds, people are categorized into several groups according to their ethnicity. Moreover, each of the particular ethnic groups is considered a subculture group. Although the subculture groups follow the same laws and rules of the community, they share a distinctive set of cultural beliefs and behaviors that differ in some significant way from the larger society. (Kendall 1998:61) TheRead MoreRacial Harmony Week Essay example1405 Words   |  6 PagesRacial tension is one of the major issues in the U.S. today. Since many centuries ago, this has been an internal problem in this country and this has caused racial strife and disunity among people. There are many who believe that racism is a thing of the past. However, racial tensions are still rampant in this nation and many others. These kinds of problems affect all of us, especially the minorities. If the problems of racial discrimination and tension are not being solved, minorities are likelyRead MoreIs Australia a Racist Country?1091 Words   |  5 PagesRacism is discrimination or abusive behaviour towards another race or religion. Australia is a very young multicultural country where at hand is strong evidence to suggest that Australia is racist, and in contrast there are many examples that support this questions that we humans beings can live in peace and harmony with all Australians. A ccording to the ABCDiamond The proportion of the population of Australians born overseas is quoted â€Å"over one quarter of Australians were born overseas†. This meansRead MoreEthics in the Bible Essay996 Words   |  4 PagesEthics in the Bible a) Throughout the bible there are instances where Jesus performed healing miracles, and when he performs these miracles he is not prejudiced against anybody so he is not racist. I think that the bible teaches that racism is wrong for example in Luke 10 Jesus tells the parable of the good Samaritan, this story tells of a man who was on his way from Jerusalem to Jericho when he was attacked by robbers who left him half dead. Soon a priest came by and sawRead MoreHow Culture Influences The Development Of Attitudes1660 Words   |  7 PagesAttitudes, racism and culture Word count without references: 1470 Attitudes An attitude are the long lasting beliefs, feelings, and behavioral responses towards social objects such as other people or issues (Attitudes and Behavior, n.d.). Attitudes can either be positive or negative. There are three components that underlie every attitude. These are referred to the ABC’S of attitudes and consist of an affective, behavioral and cognitive component. The affective component involves our feelingsRead MoreWhen Imagining A Perfect World1515 Words   |  7 Pagesto believe that the world would be a better place without war and without sickness; it should be a society of harmony. There is a natural hope that despite any differences, the world can come together and overcome all obstacles. Though this goal may seem unrealistic, there are certain steps that can be taken that will bring mankind one step closer to peace. One major step to take is to eliminate racism. It is up to the parents of young children all across the world to help fight the war against racialRead MoreRacial Discrimination : The Blacker The Berry1638 Words   |  7 Pagesdistributing that it has incredibility-impacted society, especially influenced artists to incorporate the current issue into t heir songs. For instance, artists like Kendrick Lamar have expressed the issue of racial discrimination. In his song â€Å"The Blacker the Berry† from his album To pimp a butterfly (2015), he speaks about the racism and stereotypes from his own experiences. The song is about the frustration with how African Americans are treated due to the racism. This hip-pop song enhances the messageRead MoreCanad Multicultural, Free And Harmony1537 Words   |  7 Pageshas many positive things to share with the world. Three characteristics that I think describe Canada are; multicultural, free and harmony. One word that I think describes Canada is multicultural. Over the years, Canada has grown in multicultural population and landscape. Multicultural is a word that comes with pros and cons. Along with such a multicultural society comes new ideas and a better insight into how to make our country more well rounded and diverse. I love how our nation has become suchRead MoreRacial Discrimination : The Blacker The Berry1637 Words   |  7 Pagesdistributing that it has incredibility-impacted society, especially influenced artists to incorporate the current issue into their songs. For instance, artists like Kendrick Lamar have expressed the issue of racial discrimination. In his song â€Å"The Blacker the Berry† from his album To pimp a butterfly (2015), he speaks about the racism and stereotypes from his own experiences. The song is about the frustration with how African Americans are treated due to the racism. This hip-pop song enhances the messageRead MoreAutobiography Of Malcolm X1614 Words   |  7 Pagesnationalism and separatism. The man who became one of America’s most powerful voices for African Americans was deeply affected by the terrors of racism, which shaped his view of social justice and the condemnation of the white man. The way Malcolm X narrates his experiences changes as his views on race change. At first, he wants readers to feel the destructiveness of racism, so he conveys his experiences through provocative language. When he aims to promote universal peace, he takes on a more optimistic tone

Monday, December 9, 2019

Design and Testing

Questions: 1. Design.Prior to commencing coding, you need to plan what youre going to code. Write an algorithm that describes how your program is going to work and how it links together.2. Testing.In your supplementary documentation, explain how you have tested your code and the results of your testing. This means writing down the inputs and actions which the marker should follow to reproduce the scenarios you used to check the program is working. Include screenshots demonstrating the results when you tested your code. Answers: 1. Design Algorithm: Flag = false Repeat Show menu Take choice Switch case Case one: Enter movies title Enter rating Enter duration Enter synopsis Enter release date Enter billed cast Enter director Enter genre Enter distributor Enter official website. Add movie to array Case two: Enter movie code While loop If movie exists in array Enter day Enter time Add schedule data into movie End while loop Case three: While loop Print movie detail End while loop Case four: Enter day While loop If selected day matches with day of movie array Enter day Enter time Add schedule data into movie End while loop Case five: Flag = true Exit from program END Switch case until flag = true 2. Testing Serial number Test data Reason of test Output expected Output actually observed 1 Select menu option 1 and input movie detail To test to add movie into array Program will run without error and add movie into array Program run and printed add movie into array 2 Select menu option 2 and enter schedule day and time To test to add schedule day and time into movie detail Program will add schedule day and time of movie. Program added schedule day and time of movie 3 Enter menu option 3 To test, program display all movie or not Program will display all movies. Program displayed all movies. 4 Select menu option 4 and Enter day To test all movie at selected day Program will display all movie of selected day Program displayed all movie of selected day 5 Select menu option 5 To test, program exits or not Program will exit Program exited

Monday, December 2, 2019

Marketing Plan Segmentation Essay Example

Marketing Plan Segmentation Essay Marketing plan Segmentation: Tortilla Aztec In a nutshell, segmentation is the process of dividing a broad market into specific target group. In marketing, segmentation is crucial in creating a successful marketing strategy, because marketers are then able to identify consumers who have common needs and applications for the relevant goods and services. For example demographics such as age, gender and ethnicity are one of the many criteria when segmenting a market. For our marketing plan, we have focus upon building a tortilla company. Tortilla, which is a key component in many Mexican dishes, is favored not only by Latin American, but has also become a very popular ingredient in many western and Asian foods. The concept of tortilla is that it acts like a bread; people can apply almost any kinds of vegetables and meats, fold it or wrap it (depending on the style or preference) and bite it, its as simple as eating a hamburger. The tortillas that many of us eat today however have lost its traditional value. Nowadays Tortillas are designed and manufactured for mass consumption, and as a result fresh organic ingredients are left behind. We will write a custom essay sample on Marketing Plan Segmentation specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Marketing Plan Segmentation specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Marketing Plan Segmentation specifically for you FOR ONLY $16.38 $13.9/page Hire Writer As a tortilla expert we want to put an end to the blunt asset of 21 SST century tortilla and so our company has gone back to the basics; cooking tortillas the style a Mexican street vendor would do (read product part for more detail concerning tortilla-making). This idea of authentic Mexican tortilla is what our company will be trying to capitalize on; we depend on the idea that people are still concern about quality, not quantity. In marketing terms we are focusing on consumer preference, which is essential for us to identify what market segment we are going to target. We start with measuring possibility. First Step: Measuring Possibility All marketers know that the size of the market must be big enough to be worth targeting. According to statistic Canada as of 2001 244,400 people of Latin American origin lived in Canada. That year, they represented almost 1% of the total population of Canada (Statistic Canada). In Vancouver alone, there are approximately 28,575 Hispanics, which is a surprisingly big number considering, the distance it takes to travel between the two continents. Conclusion: the sample size proves to be substantial for our Tortilla Company to continue. Second Step: Segment growth It is very important for every business to analyze the prospect for growth. First we look at the number of tortilla producer in BC and identify who they are. The leading pioneer producer so far is a company called El Comma based in Burnable. Their tortillas are distributed in most of the major authentic Mexican restaurants such as La Tequila, Don Guacamole (closed for business), Salsa Agave etc. Another competitor is a smaller company called Donna Elastic based in Surrey. Their products are supplied mostly in specialty food stores across British Columbia, although its main business is focused upon delivery orders. Other Tortilla manufacturers only river Log retails canals sun as save-on Ana gateway superman et K . From a Dustless point of view the segment growth prospect looks to be very bright. Assuming that there are only two major competitors in BC, we can still capture a market-share of approximately 25%, which is around 7500 of Mexican people. According to statistic Canada, 7500 of these people earn an average income of $28000 (lower than the Canadian average income of $30000) however still a relatively sufficient income. Our findings illustrate that these Mexican people demand homemade corn tortillas compare to tortillas produce by big international brands. However the resources are not easily available with only two major companies providing the service. In conclusion: the Vancouver Hispanic market segment still has a very big room to grow. Third Step: Formulate narrower markets (Latino Community and Mexicans) McCarthy and Perpetual suggest forming sub-markets around what you would call your typical customer, then aggregate similar people into this segment, on the condition to be able to satisfy their needs using the same Marketing mix. As previously discussed before, the central market we are targeting is the Latino community living in Vancouver, BC. Our main concern however is the Mexican community. This is where the 80120% rule applies being that Tortilla is the staple food in major Mexican dish. In the distribution and supply-chain analysis we have discussed the possibility of supplying Tortilla to major retailers such as Save-on-Food and Safely. This pursuit is quite risky, especially for a starting company like ours, because not only does it require a big investment (e. G. UAPITA for machineries), but also the fact our companys name has not been well established in the Tortilla business. It is a lactated risk however because of the following facts: For Mexicans to buy their Tortilla, they have to travel to specialty food markets, most of which are inconveniently located because of its walking distance to the nearest bus stop or Strain. Save-on and Safely on the other hand, are strategically located hence a more shopping friendly environment. The problem however is that quality homemade tortilla are only available in these boutique supermarkets. The tortillas sold in big retails are international brands such as Dittos where the product factory processed hence the poor plastic taste. This is where our tortilla company steps in; with our homemade authentic concept, we expect that there will be more incentive and attraction for more Mexicans to buy their Tortillas and along with their daily groceries. A win-win situation is at hand. Considering Other Markets (other possible area of growth) Previously we have also considered the possibility of aiming the Asian market, which is not surprisingly one of biggest market in Vancouver. We were looking at a specific sub-market with huge potential growth and we were lead to the Indian community. In BC alone, there are over 230,000 Indians, half of them residing in Surrey. Moreover with the Indian economy booming and IT outsourcing becoming the major part of the business, the continuity increase in the Indian population will surely double for the next coming years. This is backed by an analysis, which says India-based firms are starting to win larger-scale Canadian TIT contracts and growing six times faster than traditional Tier 1 providers in TO. Our analysis however results us in not entering ten market. Nine mall Drawler we race was culture. Nine Animal culture Known to De very strong are less likely to substitute their values to that of other cultures. This is shown from their preference of food. Curry the staple food for an Indian dish is not easily substitute and this is proven from our Tortilla survey; when sales, compare with what you usually have with your cu rry, would you say that this Tortilla is the best in terms of taste? 3 out of 30 Indians said no and 5 of them even gave the opinion of sticking with the traditional Indian Root when eating the curry because the two dishes already complement very well with each other. Likewise, we also discovered the Red Mole which is the other dipping sauce we used for the marketing survey asset much more delicious on the tortilla compared to when we dipped it in the Curry. In conclusion the taste off food blends in harmony when it is applied with the original traditional ingredients. This finding has led us to the conclusion of canceling out the Indian Market. Mainstream Market The mainstream market is a very broad market. It is the most dominant market and therefore has the biggest potential for growth. The people inside this market are usually not tied to buying one specific product; rather, they buy product that are in trend and replace it once it has gone out of trend. This is very apparent in markets such as technology and fashion where products come and go very quickly. The mainstream market for Tortilla can be found in big retails. As mentioned before, tortillas brands supplied in these big retails are well known international brands such as Dittos. The market sadly are used to consuming these low quality processed products and as a result many of them are not aware of what home made Mexican tortillas taste like. This situation however is an advantage for our company because of one important fact: our tortilla is a newly introduced product line. A new product line meaner that there is big room for growth and for our company to fully establish our tortilla in an existing market it will most likely require some time. For example, we need to consider factors such as Canadian housewife. These housewife play a vital role to our success in the mainstream market because they the ones who decide what goes inside the grocery; instead of the usual bread and butter for breakfast we can convince them to substitute to our low calorie home made tortilla. Once these housewife have gained more knowledge about our reduce and realized the benefit of it, we hypothetically have secured a very major part of the Canadian market Niche Market Another important contributing factor to the popular rise of Tortilla, is professional working segment. With their limited time constraints, this specific group of people prefers foods that are on the go and Tortilla is the perfect complement to this kind of lifestyle. An analysis also shows that Tortilla can fill up to 52% of your daily fiber needs and contains low calorie: perfect from a marketing standpoint because these office working people are assume to have high disposable income and therefore emend more quality alternatives such as the home made Tortillas our company produces. Another important trend we have realized is how much Vancouver people value healthy and active lifestyle. This is proven from little things such as the long lines in whole-food supermarket, the availability of vegetarian restaurants, the number of Luncheon stores across Vancouver and etc. Conclusion: Vancouver people, especially the locals are willing to pay for healthier alternatives, and with the concept AT our Menominee tortilla we can capture tons Log part AT segment. Ten market

Wednesday, November 27, 2019

History of Washing Machines

History of Washing Machines Early washing machines were invented back in the 1850s, but people have been doing laundry since they graduated from wearing fig leaves. Over the course of centuries, the technology for washing clothes has evolved from crude manual labor to high tech. Laundry Before Machines In many ancient cultures, peoples cleaned their clothes by pounding them on rocks or rubbing them with abrasive sands and washing the dirt away in streams or rivers. The Romans invented a crude soap, similar to lye, that contained ash and fat from sacrificed animals. In colonial times, the most common way of washing clothes was to boil them in a large pot or cauldron, then lay them on a flat board, and beat them with a paddle called a dolly. The metal washboard, which many people associate with pioneer life, wasnt invented until about 1833. Before that, washboards were made entirely of wood, including the carved, ridged washing surface. As late as the Civil War, laundry was often a communal ritual, especially in places near rivers, springs, and other bodies of water, where the washing was done. The First Washing Machines By the mid-1800s, the United States was in the midst of an industrial revolution. As the nation expanded westward and industry grew, urban populations mushroomed and the middle class emerged with money to spare and boundless enthusiasm for labor-saving devices. A number of people can lay claim to inventing some kind of manual washing machine that combined a wooden drum with a metal agitator. Two Americans, James King in 1851 and Hamilton Smith in 1858, filed and received patents for similar devices that historians sometimes cite as the first true modern washers. However, others would improve on the basic technology, including  members of the Shaker communities in Pennsylvania. Expanding on ideas begun in the 1850s, the Shakers built and marketed large wooden washing machines designed to work on a small commercial scale. One of their most popular models was displayed at the Centennial Exposition in Philadelphia in 1876. Fast Facts: Washing Machine Trivia A washing machine invented in France in the early 1800s was called the ventilator. The device consisted of a barrel-shaped metal drum with holes that was turned by hand over a fire.One of the first African-American inventors of note in the 19th century, George T. Sampson, received a patent for a clothes dryer in 1892. His invention  used the heat from a stove to dry clothes.The first electrical clothes dryers appeared in the United States in the years prior to World War I.In 1994, Staber Industries released the System 2000 washing machine, which is the only top-loading, horizontal-axis washer to be manufactured in the United States.The first computer-controlled consumer washer appeared in 1998. Fisher Paykels SmartDrive washing machines used a computer-controlled system to determine load size and to adjust the wash cycle to match.   Electric Machines Thomas Edisons pioneering work in electricity accelerated Americas industrial progress. Until the late 1800s, home washing machines were hand-powered, while commercial machines were driven by steam and belts. That all changed in 1908 with the introduction of the Thor, the first commercial electric washer. The Thor, the invention of Alva J. Fisher, was marketed by the Hurley Machine Company of Chicago. It was a drum-type washing machine with a galvanized tub. Throughout the 20th century, Thor continued to make innovations in washing machine technology. In 2008, the trademark was bought out by Los Angeles-based Appliances International and soon introduced a new line under the Thor name. Even as Thor was changing the commercial laundry business, other companies had their eye on the consumer market, perhaps most notably the Maytag Corporation that got its start in 1893 when F.L. Maytag began manufacturing farm implements in Newton, Iowa. Business was slow in winter, so to add to his line of products, Maytag introduced a wooden-tub washing machine in 1907. Not long after, Maytag decided to devote himself full-time to the washing machine business. The Whirlpool Corporation, another well-known brand, debuted in 1911 as the Upton Machine Co., in St. Joseph, Mich., producing electric motor-driven wringer washers. Sources Marton, Barry. Washing Machine. Encyclopedia.com. Accessed 16 Mar. 2018 Museum staff. The Shaker Improved Washing  Machine. Shaker Museum. 20 July 2016.Staff editors. Clothes Washing Machines. Edison Tech Center. 2014.Telegraph staff. A Timeline of Inventions. Telegraph.co.uk. 6 July 2000.

Saturday, November 23, 2019

Solar System Science Project Ideas

Solar System Science Project Ideas Do you have a science fair project in your future? If so, consider focusing on the solar system. Outer space is rich with mysteries and scientific questions to explore, from the phases of the moon to the existence of space dust (micrometeorites). Start with this list of solar system science fair projects. Build a Working Sundial The ancients used sundials to tell time using the position of the Sun in the sky.  You can build your own sundial with two simple materials: a flat surface (e.g. paper, cardboard) and a thin object that can stand up (e.g. a popsicle stick or straw). Once your sundial is functional, test it for accuracy a few times per day by comparing the sundials reading to your watch or clock. Make Your Own Telescope Build a telescope. Galileo did, and so can you. Learn about the basics of telescopes  here, then check out  NASAs page on building your own. The easiest one to build is a Galileoscope, made out of a cardboard tube and some lenses.   Build a Model of the Solar System You can make a scale-model solar system out of paper or in a diorama. First, find out the distances between solar system objects, then do some math to get the distances to scale within your own model. Some tabletop scale-model solar systems contain marbles for the planets, a tennis ball for the Sun, and other smaller pebbles for asteroids and comets. Make a Spacecraft Model Build a model of a NASA space probe. Many of the major probes and space-based observatories have patterns you can download and use to make scale model, including the  Hubble Space Telescope and the NASA Jet Propulsion Laboratory. Track the Lunar Phases First, read about the phenomenon of lunar phases here. Then, for a few months, observe the Moon in the sky each night, recording how, where, and when it appears. Record the information in a chart and include a drawing of the moons shape each day.  If you have the materials, you can construct a 3D model of the sun using small balls and a light source to show how the Sun illuminates the Moon and Earth throughout the month.   Study Renewable Energy For many years, NASA and other space agencies have been using solar panels to power their satellites and the International Space Station. Here on Earth, people use solar power for everything from household electricity to powering their watches and other electronics. For a science fair project on solar power, study how the Sun generates light and heat and how we convert that light and heat into usable solar power. Collect Bits of Space Micrometeorites are tiny bits of asteroid that drift through our atmosphere and land on the surface of the Earth.  You can collect them by looking in places theyre likely to end up. For example, rain and snow can wash them off of roofs, and they can flow down the drainpipes and storm gutters. You might also try looking in the piles of dirt and sand at the bottom of a rain spout.  Collect that material, remove anything that obviously is not a micrometeorite (e.g. large rocks and leaves), and spread out the remaining material on a piece of paper. Place a magnet underneath the paper and tilt it. Most of the material will slide right off; anything that does not slide off is magnetic. Study the remaining magnetic material under a magnifying glass or microscope. Micrometeorites will appear rounded and may have pits. Edited and updated by  Carolyn Collins Petersen

Thursday, November 21, 2019

Comparing Brazilian Culture to American Culture Research Paper

Comparing Brazilian Culture to American Culture - Research Paper Example These segments include ‘Power Distance’, ‘Individualism’, ‘Masculinity’, ‘Uncertainty Avoidance’, ‘Pragmatism’, and ‘Indulgence’ (The Hofstede Center, 2014). The discussion henceforth will give an elaborative account of these cultural segments as observable in the prospective market of the Canadian company, i.e. in Brazil. Power distance exhibits the acceptance of power hierarchy and the inequalities among people residing within a given society. Observably, Brazil scores 69, where Canada scores 39 as per the Hofstede’s model when examining this factor (The Hofstede Center, 2014). This further reveals that where Canada believes in egalitarianism, Brazilian communities believe in power hierarchy and accept the inequality as a part of their culture (Ferguson, 2007). It is thus necessary for the Canadian company to understand the power distance of Brazil and formulate their organizational decision-making structure accordingly. Individualism, another facet of the Hofstede’s cultural model, indicates whether people prefer group oriented lifestyle practices or individualism. Brazil scores 38 in this section according to Hofstede’s model analysis, where Canada scores 80 (The Hofstede Center, 2014). This implies that Brazilian people are group oriented where Canadians are highly individualistic in nature. Certainly, in the business world, group orientation attitude among employees and customers can create the difference of opinions as well as communication gap. Due to the huge difference of nature, it is better for the company to use Polycentrism to connect with the culture of Brazil (Ferguson, 2007). The paradigm of masculinity in the Hofstede’s model replicates whether the cultural backbone of the country is success oriented, achievement-oriented or it is based on the quality of life.  

Tuesday, November 19, 2019

Who would you rather study with. Aristotle or Plato Essay

Who would you rather study with. Aristotle or Plato - Essay Example Aristotle on the other hand believed in logical reasoning. He is credited with laying the foundation of the use of logic as a basis for study and scientific thought. Thus, whereas Aristotle’s philosophical values are heavily influenced by Plato, there exist huge differences in their way of thinking. Based on my personal values, ethics, religion affiliation, beliefs, and philosophical orientation, I would rather study with Aristotle than Plato. Aristotle believed that when we breakdown and classify the natural world in a systematic and analytic way, we can reach a true argument where we can come up with a conclusion that is concrete and correct. This is against the arguments brought forward by Plato who insisted on making valid arguments that made sense logically but could not be either considered factually true or false. An example of a valid argument would be to suggest that old people are bad drivers. Therefore, when you meet let’s say Jack, who is old, you out righty judge him as being a bad driver. While this may be a valid argument, it may not be entirely true without seeing him driving. On the other hand, a true argument as presented by Aristotle would probably suggest that all fruits have seeds. Therefore, regardless of whether he picks an apple or an orange, he will know that these are fruits and thus they all have seeds. Therefore, Aristotle would make a better person to learn with because of his valid sci entific arguments. While both Plato and Aristotle contributed hugely to political philosophy and shared some sentiments on the ideal state, Aristotle still had some of his reservations on some of Plato’s philosophical teachings. While Plato advocated for communism in which he called for abolition of ownership of private property, Aristotle was a harsh critic on the abolition of private property. Plato was of the

Sunday, November 17, 2019

Nutrition - Obesity Essay Example for Free

Nutrition Obesity Essay Objective: To assess the association between the consumption of fast food (FF) and body mass index (BMI) of teenagers in a large UK birth cohort. Methods: A structural equation modelling (SEM) approach was chosen to allow direct statistical testing of a theoretical model. SEM is a combination of confirmatory factor and path analysis, which allows for the inclusion of latent (unmeasured) variables. This approach was used to build two models: the effect of FF outlet visits and food choices and the effect of FF exposure on consumption and BMI. Results: A total of 3620 participants had data for height and weight from the age 13 clinic and the frequency of FF outlet visits, and so were included in these analyses. This SEM model of food choices showed that increased frequency of eating at FF outlets is positively associated with higher consumption of unhealthy foods (b ? 0. 29, Po0. 001) and negatively associated with the consumption of healthy foods (b ? A1. 02, Po0. 001). The SEM model of FF exposure and BMI showed that higher exposure to FF increases the frequency of visits to FF outlets (b ? 0. 61, Po0.001), which is associated with higher body mass index standard deviation score (BMISDS; b ? 0. 08, Po0. 001). Deprivation was the largest contributing variable to the exposure (b ? 9. 2, Po0. 001). Conclusions: The teenagers who ate at FF restaurants consumed more unhealthy foods and were more likely to have higher BMISDS than those teenagers who did not eat frequently at FF restaurants. Teenagers who were exposed to more takeaway foods at home ate more frequently at FF restaurants and eating at FF restaurants was also associated with lower intakes of vegetables and raw fruit in this cohort. International Journal of Obesity (2011) 35, 1325–1330; doi:10. 1038/ijo. 2011. 120; published online 28 June 2011 Keywords: fast food; overweight; ALSPAC Introduction Childhood obesity prevalence have risen dramatically in the last 30 years in the Western world with the most recent figures for England and Wales show that 17% of boys and 16% of girls are obese. 1 An increase in the availability of calorie dense foods is implicated as one of the factors in the aetiology of the obesity epidemic. Fast food (FF) is one section of the food market that has grown steadily over the last few decades and it was worth d8. 9 billion in the United Kingdom in 2005. 2 FF is typically quick, convenient, cheap and Correspondence: Dr LK Fraser, School of Geography, University of Leeds, University road, Leeds LS2 9JT, UK. E-mail: l. k. [emailprotected] ac. uk Received 6 February 2011; revised 21 April 2011; accepted 12 May 2011; published online 28 June 2011 uniform in its production,3 but FF is often high in saturated fats, energy dense and has low micronutrient content. 4–9 Studies from the United States of America have shown that children who consume FF (when compared with children who do not eat FF) have higher energy intake and higher fat intakes9,10 as well as lower vegetable and milk intake. 10,11 Therefore, the consumption of such foods could possibly result in a positive energy balance; and hence, weight gain. There is some evidence from longitudinal studies in the United States of America that consuming FF as a teenager can result in weight gain in both early12 and middle adulthood. 13 FF is often marketed to children and adolescents through television, internet and movie advertising,14–17 with brand recognition being present from an early age. 18 The addition of toys as gifts with FF meals also attracts children. There is growing body of literature that has assessed the location of FF outlets and has found that areas of higher deprivation Fast food and body mass index LK Fraser et al 1326 have more FF outlets19–21 and that FF outlets are often located close to schools. 22–24 The majority of research to date has been undertaken in the United States of America, but a study that analysed the fat content of a FF meal in McDonald’s and Kentucky Fried Chicken outlets in 35 countries showed that the amount of fat varied considerably between countries, within the same FF outlet. 25 This means that results from studies in the United States of America may not be generalisable to other countries. This study aims to assess the cross-sectional association between the consumption of FF and the body mass index (BMI) of teenagers in a large UK birth cohort. Methods The data for this study were obtained from the Avon Longitudinal Study of Parents and Children (ALSPAC),26 which is a birth cohort study where pregnant mothers who lived in the old Avon County in the United Kingdom (the Bristol region) were recruited in the early 1990s. A total of 14 541 mothers completed recruitment. Because of retrospective recruitment the total sample size was 15 224 fetuses and 14 610 live births. This paper presents data on the teenagers who attended the year 13 clinic and completed the year 13 questionnaire. Variables The food frequency data were collected from the questionnaires completed by mother (or carer) and separate questionnaires completed by the teenagers themselves at age 13 years. The data used from the carer questionnaire (collected at the same time point) referred to the questions ‘How often does s/he eat in a FF restaurant? The responses to this question were collected as never/rarely, once a month, once every 2 weeks, once or twice per week, 3–4 times a week, 5 or more times a week. The carers were also asked ‘In total, how many portions of vegetables does s/he eat in a week (do not include potatoes)’, ‘In total, how many portions of raw fruit does s/he eat in a week? ’ These were free numerical responses, which were retained as a continuous variable for analyses. In the food frequency part of the teenager completed questionnaire the teenagers were asked ‘If you ever buy food yourself from outside school, or from school vending machines, how often do you buy and eat each of the following things (include after school and weekends): chips, burger, pizza, sandwich, pies or pasties, chocolate, crisps, fruit and other food. ’ The height and weight data were collected at clinic visits at B13 years. The exact age, sex, height and weight were used to calculate a BMI standard deviation score (BMISDS) for each participant (1990 UK reference dataset). 27 The teenagers International Journal of Obesity were classified as obese if their BMISDS was greater than the 95th percentile (BMISDS41. 64). The physical activity data were collected via accelerometry at the age 13 clinic visit. 28 The participants wore an accelerometer for seven consecutive days and the measure used from this is mean counts per minute, which is a continuous variable. A deprivation score was assigned to each participant by matching the coordinates of their residential address (when carer questionnaire was completed) to the appropriate lower super output area. Each lower super output area has an index of multiple deprivation score (Index of Multiple Deprivation 2007 (IMD))29 assigned from the local census data. This is a continuous variable in which a higher number indicates an area of higher deprivation. Ethnicity was assigned as per the child’s ethnicity into a binary variable of ‘white British’ and ‘other’ ethnicity. Statistical modelling Descriptive statistics were performed in STATA version 10 (StataCorp LP, College Station, TX, USA). A structural equation modelling (SEM) approach was chosen to allow direct statistical testing of a theoretical model. SEM has many benefits over traditional regression techniques, which include the ability to model equations simultaneously and the incorporation of latent variables. 30 SEM is a combination of confirmatory factor and path analysis, which allows for the inclusion of latent (unmeasured) variables. 31 This approach was used to build two models: the effect of FF outlet visits and food choices and the effect of FF exposure on consumption and BMI. The SEM analyses were undertaken in AMOS version 17. 0 (IBM SPSS, USA). The hypothesised model for food choices is shown in the results section (Figure 2). The observed variables are displayed as boxes and latent variables as circles. Each observed variable has an associated random error term and each latent variable has an associated disturbance term, which represents the variance in the latent variable that has not been explained by the observed variables associated with that latent variable. Regression paths are shown by singleheaded arrows and covariances by double-headed curved arrows. The model fit was assessed by two indices; the comparative fit index (CFI) and the root mean square error of approximation (RMSEA). The CFI is a comparison of the hypothesised model compared with an independence model where all parameters are assumed to be independent. The RMSEA gives an indication of ‘how well would the model, with unknown but optimally chosen values, fit the population covariance matrix if it were available’. 32 A combination of CFI40. 95 and a RMSEA of o0. 50 is a sign of good model fit. The w2-test of overall fit is very sensitive to large sample size so has not been used in these models. 30 The two models were constructed a priori using previous research. The nutritional content of chips, burgers, pizza and Fast food and body mass index LK Fraser et al 1327 pies are known to be high in saturated fat and energy and therefore are ‘unhealthy’,4–9,33 whereas fruit and vegetables are known to contain fibre and vitamins and so are classified as ‘healthy’. Exposure to FF outlets is known to be higher in areas of higher deprivation. 19–21 In the food choices model, unhealthy consumption (latent variable) was modelled from the frequency of consumption of chips, burger, pizza and pies (reported by the teenagers themselves), and the healthy consumption was modelled from the number of pieces of vegetables and raw fruit consumed by the teenager (maternal report). The number of times that the teenager visited a FF outlet (maternal report) was regressed on the unhealthy and healthy consumption variables. The model for the effect of FF exposure on consumption and BMISDS is shown in Figure 3. Here exposure is a latent variable modelled from maternal and paternal takeaway frequency and deprivation score. The exposure is regressed on the number of visits to FF outlet. The BMISDS at age 13 years is the main outcome of this model. Ethical approval for the study was obtained from the ALSPAC Law and Ethics Committee and the local research ethics committees. Results A total of 3620 participants have data for height and weight from the age 13 clinic and the frequency of FF outlet visits, and were included in these analyses (SEM cannot use individuals with missing data). A total of 1711 (47. 3%) were boys and 456 (12.6%) obese. The descriptive statistics are shown in Table 1. Frequency of visiting FF outlets and food consumption frequencies are shown in Figure 1. The results of model 1 are shown in Figure 2 with regression weights shown in Table 2. This model showed that increased frequency of eating at FF outlets was positively associated with higher consumption of unhealthy foods (b ? 0. 29, Po0. 001) and negatively associated with the consumption of healthy foods (b ? A1. 02, Po0. 001). The CFI for model 1 was 0. 98 and the RMSEA was 0. 05 (90% confidence interval 0. 044, 0. 058). These represent good approximate model fit. Table 1. The results of model 2 are shown in Figure 3 with regression weight shown in Table 3. This model showed that increased exposure to FF increased the frequency of visits to FF outlets (b ? 0. 61, Po0. 001), which in turn was associated with higher BMISDS (b ? 0. 08, Po0. 001). Deprivation was the largest contributing variable to the exposure (b ? 9. 2, Po0. 001). The CFI for model 2 was 0. 98, and the RMSEA was 0. 021 (90% confidence interval 0. 009, 0. 033). These represent very good approximate model fit. Discussion This study shows that teenagers who are exposed to more unhealthy foods at home are more likely to eat at FF restaurants and have a higher BMISDS. The negative association of increased visits to FF outlets on consumption of healthy foods (fruit and vegetables) has also been demonstrated. The FF restaurant use in this analysis was reported by the mother or main carer of the teenager and showed that nearly 60% of all the teenagers ate at a FF restaurant at least once a month. This appears to be less frequently than in the United States of America, where studies showed that 60% of older children and adolescents ate FF more than once per week34 and that B30% of children ate at a FF restaurant on any typical day. 9. As one part of the SEM this study showed that eating at a FF outlet was associated with a higher BMISDS. There were no previous UK studies to compare these results with, but previous studies from the United States of America have not found consistent results. Boutelle et al. 11 found no association between frequency of FF consumption and adolescent BMI or weight status, and an Australian study Descriptive statistics Mean BMISDS Deprivation (IMD 2007)29 Physical activity (c. p. m. ) Raw fruit (portions per week) Vegetables (portions per week) s. d. Median IQR 0. 29 13. 7 541 9. 5 9. 5 1. 14 11. 4 190 7 7 0. 024 10. 6 511 8 8 A0. 47, 1. 06 5. 9, 17. 0 404, 653 5, 14 5, 12 Abbreviations: BMISDS, body mass index standard deviation score for age and sex; c. p. m. , cycles per minute; IMD 2007, Index of Multiple Deprivation 2007; IQR, interquartile range. Figure 1 Food frequency data. International Journal of Obesity Fast food and body mass index LK Fraser et al 1328 Figure 2 Results of SEM model of food choices. Table 2 Results of SEM model of food choices Regression weights a Unhealthy’fast food Healthy’fast food Chips’unhealthy Burger’unhealthy Fruit’healthy Vegetables’healthy Pizza’unhealthy Pies’unhealthy Estimate s. e. CR P 0. 285 A1. 023 1. 000 0. 732 1. 000 1. 157 0. 774 0. 530 0. 021 0. 124 13. 439 A8. 274 o0. 001 o0. 001 0. 016 45. 243 o0. 001 0. 148 0. 018 0. 016 7. 802 42. 483 32. 720 o0. 001 o0. 001 o0. 001 Abbreviations: CR, critical ratio; SEM, structural equation modeling. aAll consumption variables units: never/rarely, once a month, once every 2 weeks, once or twice per week, 3–4 times a week, 5 or more times a week. showed that FF eaten at home (but not away from home) was associated with higher BMI in adolescents (MacFarlane). Two longitudinal studies using data from the CARDIA study found that higher FF intake in adolescence was associated with higher BMI in young adulthood12 and those who ate FF more than twice a week had put on an extra 4. 5 kg of weight 15 years later. 13 The teenagers who ate more frequently at FF restaurants were more likely to eat less fruit and vegetables, as well as consume more unhealthy foods (chips, burger, pizza, pies) than those teenagers who ate at FF restaurants less frequently. This is an indication that the consumption of unhealthy foods may displace healthy food choices. This is similar to previous research in the United States of America, International Journal of Obesity which showed that children who ate FF consumed 45 g less vegetables per day than children who did not eat FF. 10 At age 13 years the food frequency data were a combination of maternal and self-report from the teenagers, but the total macro- and micronutrient values could not be assessed in this study as these data were not yet available at the time of writing. Deprivation was the largest contributor to the FF exposure variable. This could be explained by the fact that those of higher deprivation eat more FF because of the relative cheapness of FF. It has also been shown in many studies in the United Kingdom and the United States of America that areas of higher deprivation have more FF outlets than more affluent areas therefore, FF is more readily available. 35 An interesting economics paper from the United States of America showed that increasing the cost of FF by $1 could decrease BMI by 0. 78 units. 36 The increased consumption of unhealthy foods (chips, burger, pizzas and pies) by those teenagers who ate more frequently at FF outlets was not surprising, but the associated negative effect of the consumption of fruit and vegetables by these participants is important. These teenagers will not only be consuming more of the saturated fat and salt from the burgers, and so on, but at the same time they are not consuming important nutrients from fruit and vegetables. Although many FF outlets now offer more healthy alternatives such as fruit and vegetables, the consumers may still be choosing the unhealthy foods. Fast food and body mass index LK Fraser et al 1329 The FF question completed by the carer did not specify what constituted FF so some respondents may only count large franchises as FF whereas others may use a broader definition that includes independent takeaways. Although the frequency of eating at a FF restaurant was asked, the carers were not asked about the food eaten from these establishments and many FF restaurants now offer more ‘healthy’ alternatives. Although the majority of FF items do not meet the Food Standards Agency nutrient standards for total fat, saturated fat, sugar and sodium there are wide variations in similar products from different FF outlets with sodium content varying by up to four times in fried chicken products. 37 Therefore, having data on which food items were consumed from which FF outlet would further enhance future studies. There was no information on why the teenagers ate at FF restaurants, and key questions for the future include; was there no alternative eating establishments in their neighbourhood? Did they prefer FF to other meals or was the cost of food important? Conclusions This study has shown that the teenagers who ate at FF restaurants consumed more unhealthy foods and were more likely to have higher BMISDS than those teenagers who did not eat frequently at FF restaurants. Teenagers who were exposed to more takeaway foods at home ate more frequently at FF restaurants. Eating at FF restaurants was also associated with lower intakes of vegetables and raw fruit in this cohort. Figure 3 The SEM model of FF exposure and BMI. Table 3 Results of SEM model of FF exposure and body mass index Regression weights Fast food ’exposure. Maternal fast food’exposure Deprivation’exposure Paternal fast food’exposure BMISDS’fast food BMISDS’c. p. m. a Estimate s. e. CR 0. 61 1. 000 9. 20 0. 66 0. 08 0. 00 0. 07 8. 654 1. 07 0. 08 0. 02 0. 00 8. 605 8. 680 3. 586 A3. 351 P o0. 001 o0. 001 o0. 001 o0. 001 o0. 001 Abbreviations: BMISDS, body mass index standard deviation score for age and sex; c. p. m. , cycles per minute; CR, critical ratio; FF, fast food; IMD 2007, Index of Multiple Deprivation 2007; SEM, structural equation modeling. a All consumption variables units: never/rarely, once a month, once every 2 weeks, once or twice per week, 3–4 times a week, 5 or more times a week. Strengths/limitations This is a large dataset with good-quality height and weight data taken at clinic visits by trained staff using validated equipment. There were food consumption data about the teenagers available from both the teenagers and their carers, but this is a cross-sectional study so causation cannot be implied from this data. As expected in a longitudinal study there is attrition and the subcohort used in this study may not be truly representative of the whole cohort. Conflict of interest The authors declare no conflict of interest. Acknowledgements. We are extremely grateful to all the families who took part in this study, the midwives for their help in recruiting and the whole ALSPAC team, which include interviewers, computer and laboratory technicians, clerical workers, research scientists, volunteers, managers, receptionists and nurses. The UK Medical Research Council (grant ref: 74882), The Wellcome Trust (grant ref: 076467) and the University of Bristol provide core support for ALSPAC. LKF was funded by ESRC/MRC studentship. References 1 Craig RS. Health survey for England 2007, 2008. Available from http://www. natcen. ac. uk/study/health-survey-for-england-2007. 2 Keynote.UK fast food and home delivery outlets, 2006. International Journal of Obesity Fast food and body mass index LK Fraser et al 1330 3 DeMaria AN. Of fast food and franchises. J Am Coll Cardiol 2003; 41: 1227–1228. 4 Astrup A. Super-sized and diabetic by frequent fast-food consumption? Lancet 2005; 365: 4–5. 5 Brown K, McIlveen H, Strugnell C. Young consumers and the hospitality spectrum. Appetite 1998; 31: 403. 6 Harnack LJ, French SA, Oakes JM, Story MT, Jeffery RW, Rydell SA. Effects of calorie labeling and value size pricing on fast food meal choices: results from an experimental trial. Int J Behav Nutr Phys Act 2008; 5: 63. 7 Lewis LB, Sloane DC, Nascimento LM, Diamant AL, Guinyard JJ, Yancey AK et al. African Americans’ access to healthy food options in South Los Angeles restaurants. Am J Public Health 2005; 95: 668–673. 8 Paeratakul S, Ferdinand DP, Champagne CM, Ryan DH, Bray GA. Fast-food consumption among US adults and children: dietary and nutrient intake profile. J Am Diet Assoc 2003; 103: 1332–1338. 9 Schmidt M, Affenito SG, Striegel-Moore R, Khoury PR, Barton B, Crawford P et al. Fast-food intake and diet quality in black and white girls the national heart, lung, and blood institute growth and health study. Arch Pediatr Adolesc Med 2005; 159: 626–631. 10 Bowman SA, Gortmaker SL, Ebbeling CB, Pereira MA, Ludwig DS. Effects of fast-food consumption on energy intake and diet quality among children in a national household survey. Pediatrics 2004; 113: 112–118. 11 Boutelle KN, Fulkerson JA, Neumark-Sztainer D, Story M, French SA. Fast food for family meals: relationships with parent and adolescent food intake, home food availability and weight status. Public Health Nutr 2007; 10: 16–23. 12 Duffey KJ, Gordon-Larsen P, Jacobs DR, Williams OD, Popkin BM. Differential associations of fast food and restaurant food consumption with 3-y change in body mass index: the Coronary Artery Risk Development in Young Adults Study. Am J Clin Nutr 2007; 85: 201–208. 13 Pereira MA, Kartashov AI, Ebbeling CB, Van Horn L, Slattery M, Jacobs DR et al. Fast-food habits, weight gain, and insulin resistance (the CARDIA study): 15-year prospective analysis. Lancet 2005; 365: 36–42. 14 Sutherland LA, MacKenzie T, Purvis LA, Dalton M. Prevalence of food and beverage brands in movies: 1996–2005. Pediatrics 2010; 125: 468–474. 15 Powell LM, Szczypka G, Chaloupka FJ. Trends in exposure to television food advertisements among children and adolescents in the United States. Arch Pediatr Adolesc Med 2010; 164: 794–802. 16 Hillier A, Cole BL, Smith TE, Yancey AK, Williams JD, Grier SA et al. Clustering of unhealthy outdoor advertisements around child-serving institutions: a comparison of three cities. Health Place 2009; 15: 935–945. 17 Lingas EO, Dorfman L, Bukofzer E. Nutrition content of food and beverage products on Web sites popular with children. Am J Public Health 2009; 99(Suppl 3): S587–S592. 18 Robinson TN, Borzekowski DLG, Matheson DM, Kraemer HC. Effects of fast food branding on young children’s taste preferences. Arch Pediatr Adolesc Med 2007; 161: 792–797. International Journal of Obesity. 19 Cummins SCJ, McKay L, MacIntyre S. McDonald’s restaurants and neighborhood deprivation in Scotland and England. Am J Prev Med 2005; 29: 308–310. 20 Fraser LK, Edwards KL. The association between the geography of fast food outlets and childhood obesity rates in Leeds, UK. Health Place 2010; 16: 1124–1128. 21 Macdonald L, Cummins S, Macintyre S. Neighbourhood fast food environment and area deprivation-substitution or concentration? Appetite 2007; 49: 251–254. 22 Neckerman KM, Bader MDM, Richards CA, Purciel M, Quinn JW, Thomas JS et al. Disparities in the food environments of New York City public schools. A J Prev Med 2010; 39: 195–202. 23 Davis B, Carpenter C. Proximity of fast-food restaurants to schools and adolescent obesity. Am J Public Health 2009; 99: 505–510. 24 Seliske LM, Pickett W, Boyce WF, Janssen I. Density and type of food retailers surrounding Canadian schools: variations across socioeconomic status. Health Place 2009; 15: 903–907. 25 Stender S, Dyerberg J, Astrup A. Fast food: unfriendly and unhealthy. Int J Obes 2007; 31: 887–890. 26 Golding J, Pembrey M, Jones R, Team AS. ALSPAC-The Avon Longitudinal Study of Parents and Children – I. Study methodology. Paediatr Perinat Epidemiol 2001; 15: 74–87. 27 Cole TJ, Freeman JV, Preece MA. Body-mass index reference curves for the UK, 1990. Arch DisChild 1995; 73: 25–29. 28 Riddoch CJ, Leary SD, Ness AR, Blair SN, Deere K, Mattocks C et al. Prospective associations between objective measures of physical activity and fat mass in 12–14 year old children: the Avon Longitudinal Study of Parents and Children (ALSPAC). Br Med J 2009; 339: b4544. 29 Index of Multiple Deprivation 2007 (IMD 2007). 30 Kline R (ed) Principles and Practice of Structural Equation Modeling. The Guildford Press: New York, 2005. 31 Tomarken AJ, Waller NG. Structural equation modeling: strengths, limitations, and misconceptions. Annu Rev Clinic. Psychol 2005; 1: 31–65. 32 Byrne BM (ed). Structural Equation Modelling with AMOS. Lawrence Erbaum Associates: London, 2001. 33 Astrup A, Dyerberg J, Selleck M, Stender S. Nutrition transition and its relationship to the development of obesity and related chronic diseases. Obes Rev 2008; 9: 48–52. 34 Taveras EM, Berkey CS, Rifas-Shiman SL, Ludwig DS, Rockett HRH, Field AE et al. Association of consumption of fried food away from home with body mass index and diet quality in older children and adolescents. Pediatrics 2005; 116: E518–E524. 35 Fraser LK, Edwards KL, Cade J, Clarke GP. The geography of fast food outlets: a review. Int J Environ Res Public Health 2010; 7: 2290–2308. 36 Powell LM. Fast food costs and adolescent body mass index: evidence from panel data. J Health Econ 2009; 28: 963–970. 37 Dunford E, Webster J, Barzi F, Neal B. Nutrient content of products served by leading Australian fast food chains. Appetite 2010; 55: 484–489. Copyright of International Journal of Obesity is the property of Nature Publishing Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holders express written permission. However, users may print, download, or email articles for individual use.

Thursday, November 14, 2019

Rocketry :: Essays Papers

Rocketry, the use of rocket power as a propulsion mechanism, has changed the boundaries of man’s domain.Before the advent of efficient rocket power, space flight was seen as an impossibility and exclusively the subject of science fiction stories.The nature of rocket power changed in the early twentieth century when a man named Robert Hutchings Goddard focused his research and his entire life on efficient rocket propulsion.Rocket power had been thought of long before Goddard’s time, but he was the first to have success with it. The earliest record of rocket propulsion dates to 1232 CE from China.Chinese Chronicles of the battle of Kai-Feng make mention of a â€Å"flying fiery arrow† that was used during battles â€Å"with telling effect against invading Mongol hordes† (xiii Goddard & Pendray).This object was a form of what we now call fireworks that was packaged with more propellant.During the middle ages, other objects were adapted from the Chinese invention in many other countries and were also used as a weapon to confuse, and to a lesser extent attack, the enemy.This practice was continued into the late eighteen hundreds. Rocketry did not progress greatly for a long time after its first uses.The next large advancement came from Hermann Ganswindt (1856-1934) of Germany.Ganswindt was a failed lawyer whose real passion was for science.He predicted rocket propulsion in theory and made the first design that was sound in principle in 1891.Ganswindt proposed his ideas to the German War Ministry, but was sadly rejected and was looked on as a non-professional scientist trying to do professional work.He had made the underlying theory that is used in modern space ships, but the theory was â€Å"too far in advance of his time for it to be understood†(23 Gartmann).Subsequently, Ganswindt had no success or advancement in the field and lost all his money in the aftermath of World War I preceding his death in 1934. Sir Isaac Newton’s laws of motion had been published and widely known for quite some time by this point, but Konstantin Tsiolkovski saw that the third law of motion provided the mechanism for successful rocket propulsion in space.In 1898, Tsiolkovski completed and published The Exploration of Cosmic Space by Rocket.The book meticulously and rigorously set forth the calculations associated with rocket propulsion.This act was the mathematical quantification of rocketry.When the calculations are examined, the physics of the propulsion showed that a liquid fuel, as opposed to a solid or composite propellant, would prove to be a more efficient power source and Tsiolkovski asserted that a liquid fuel would be necessary.

Tuesday, November 12, 2019

Millennium Development Goals Essay

The term â€Å"sanitation† is applied to a wide range of subjects such as: * Improved sanitation – refers to the management of human faeces at the household level. This terminology is the indicator used to describe the target of the Millennium Development Goal on sanitation, by the WHO/UNICEF Joint Monitoring Programme for Water Supply and Sanitation. * On-site sanitation – the collection and treatment of waste is done where it is deposited. Examples are the use of pit latrines, septic tanks, and Imhoff tanks. * Food sanitation – refers to the hygienic measures for ensuring food safety. * Environmental sanitation – the control of environmental factors that form links in disease transmission. Subsets of this category are solid waste management, water and wastewater treatment,industrial waste treatment and noise and pollution control. * Ecological sanitation – an approach that tries to emulate nature through the recycling of nutrients and water from human and animal wastes in a hygienically safe manner. Sanitation can be of three types Personal sanitation Sanitation at home Sanitation at surroundings. â€Å"Wash your hands before you eat†¦ give those germs a clean sweep.† 1) Personal sanitation :- a) Bathing regularly b) Washing your hands after using washroom c) Washing your hands before having food d) Cutting your hairs clean e) Cutting your nails & keeping them clean f) Drinking clean water,using chlorine tablets or boiling it 2) Sanitation at home a) Keeping your home clean b) Keeping washroom at home clean c) Using washroom rather than going in open d) Eating healthy & nutritious food e) Washing fruits before eating 3) Surroundings a) Saniataion at school b) Sitting on clean benches c) Cleanliness while playing at playgrounds d) Dressing/cleaning your wounds e) Don’t play at dirty places f) Stay away from hazardous chemicals Why sanitation is important 1) To keep you healthy 2) You will smell good 3) Waste attracts disease carrying hosts like rats & other scavengers. 4) In our country most of the diseases are caused due to contaminated water and poor sanitation. In tribal areas, there are shortage of water supply and lack of awareness about proper sanitation till today. People depend on the water of polluted rivers or ponds and suffer from lack of sanitation. These cause highly infectious diseases such as – diarrhea, malaria, cholera, jaundice, plague etc. If we follow clean sanitation and use purified water then we can easily control and avoid many of the above diseases.

Sunday, November 10, 2019

Performance Indicator Case Analysis

PRODUCT FLOW ALONG SUPPLY CHAIN: SOURCING IN CHINA vs. HONG KONG They are many aspects involved making a decision on which styles to source from China and which styles to source from Hong Kong. The differences between the producing the products in China and Hong Kong are: * ORDER SIZES: The minimum production quantity for a style in China is 1200 units while in Hong Kong it is 600 units. Thus Hong Kong factory can produce smaller order quantities effectively, thus enabling the company’s to increase the range of products it offered and manage the inventory risk.Reason: This difference in production abilities is mainly due to the high skilled labor coupled with shorter production lines in Hong Kong compared to the low skilled and long production lines in China * LABOUR The workers in Hong Kong worked about 50% faster compared to the workers in China. As a result the parka line in Hong Kong requires only 10 workers to complete all the operations whereas the parka line in China re quire up to 40 workers. This resulted in the longer production lines.In spite of the high quality of workers in Hong Kong, the unemployment rate in the country is very low and most of the younger workers prefer office jobs. Hence it is difficult to acquire labor in Hong Kong. Reason: The differences in the efficiency might be due to the variances in the trainings given to the workers in China and Hong Kong. The workers in Hong Kong were more cross functional and were trained to work in broader range of jobs compared to the Chinese workers. * TOTAL COST The overall cost of production is lower in China as compared to Hong Kong.Though there is a definite cost advantage, there are strict quota restrictions by the U. S government on shipping goods from China when compared to Hong Kong. Reason: The lower production costs in China can be mostly attributed to the low wage rates compared to the wage rates paid in Hong Kong. The workers are paid $0. 16 per hour in China compared to $3. 84 per hour paid in Hong Kong. * QUALITY Another main difference between sourcing in China and Hong Kong is the quality of the products. The quality and reliability of the products from China is relatives low when compared to Hong Kong.Reason: The difference in quality could mainly be attributed to the labor skill and efficiency in both the regions. The workers in Hong Kong have the capability to ramp up the production faster and thus they had the shorter production lines. Longer production lines in China led to the greater imbalances both in the quality and time required in manufacturing the product. Recommendation Based on our analysis we found the order quantity for each of the 10 parkas. A detailed order quantity for each of the 10 parkas is given in appendix 3. Steps for calculating order quantity: For Obermeyer we have Cu = $27 and Co = $9 from this we calculate CSL for Obermeyer = . 75. This means that there is 25% probability for a stock out applicable for each of the 10 parkas. * We used two standard deviations for the normal distribution of demand. * By using the formula Q=Z. S. D+mean for 25% stock out the overall quantity to be ordered is calculated to be 26412. * Since we need to order 10,000 units the summation of order quantity of all the 10 parkas is equal to 10,000. * We assume that the demand for each of the 10 parkas will be in same proposition.Using this we calculate for Z; Z=1. 06. * Using the z value, mean and standard deviation we calculate the order quantity for each of the 10 parkas. (See appendix 3) * Also total expected profit for 10 parkas is approximately $2. 3 Million and average left over quantity is 69 units per parka. APPENDIX 1) Cost analysis at different stages of production. OBERSPORT| Â  | | | cost if made in hongkong | $60. 08 | | | cost if made in China | $51. 92 | | | weighted average cost | $56. 00 | | | | | | | Greig Shell fabric | $9. 00 | | | Finishing of Shell fabric | $3. 90 | | |Finished lining fabric| $3. 90 | | | Ins ulation | $4. 80 | | | Zippers | $3. 60 | | | Thread| $0. 60 | | | Logo,Patches etc | $3. 00 | | | Snaps| $0. 90 | | | Dyeing of snaps | $0. 30 | | | | $30. 00 | | | | | | | Agent fee| Â  | | | Hong Kong | 3. 49| | | China| 2. 98| | | | Â  | | | Labor cost per unit | Â  | | | China| 0. 78| | | Hong Kong| 10| | | | | | | Tranportation cost (weighted average ) | Quantity| charge/unit| total| Ocean | 160000| 1. 4| 224000| Air | 40000| 5| 200000| weighted average | 200000| | 424000| weighted average/unit| Â  | Â  | $2. 12 | Appendix 2 Appendix 3

Thursday, November 7, 2019

Life-Span Development

Life-Span Development Free Online Research Papers From the time of conception until death, humans constantly change. Even though some of the changes result from chance incidents and unique to his or her choices, most of changes throughout life’s different stages are due to the common biological and psychological make up. Life-Span development is the physical, cognitive, social, and emotional development of humans through all life stages that consist of conception through childhood, adolescence, and early through late adulthood. Through characteristics, domains and periods, the lifespan perspective is evaluated. Lifespan Development Life-span development begins with conception and continues all throughout life from changes that begin at conception and last until death. Children go through many changes throughout life that develop over time such as physical growth, cognitive development and psychosocial development including emotional and social development. The physical development consists of body and organ growth, physical signs of aging and motor abilities. Cognitive development is responsible for the way children think and perceive the world through continuities in perception, language, learning memory and problem solving. Psychosocial display changes in personal and interpersonal development such as emotions and social relationships (Sigelman Rider, 2005, pp. 2, 3). Emotional development enables children to feel emotions such as embarrassment, guilt, or pride. Social development affects how children understand friendship, sharing and interaction with others. Each development interacts and influences one a nother (Kuther, 2000). Characteristics of the Lifespan Perspective Development has unique features depending on the individual. Improvements in nutrition, health and medical knowledge have increased the average life expectancy. The lifespan perspective is made up of characteristics which are lifelong, multidirectional, multidimensional, plastic, multidisciplinary, contextual and involving growth, maintenance, and regulation. Development is lifelong meaning that no age period is supreme and is also faced with challenges and adjustments which are multidimensional. This is affected by biological, psychological and social forces. Lifespan development is also multidirectional meaning that continued growth as well as decline affects development. Researchers point out that development is plastic which has the capacity for change. A child whose intellectual development is diminished from malnutrition can regain intellect if they are given a proper diet and positive experiences. Lastly, development is highly diverse and influenced by many forces such as biol ogical, historical, social, and cultural (Berk, 2007 chap. 1 p. 8-10. Human Development Domains and Periods The three major domains of development each affecting each other is biological, cognitive and psychosocial. The biological domain represents bodily changes, maturation and growth. The cognitive domain consists of mental processes of imaging, perceiving, reasoning and problem solving. This leaves the psychosocial domain, the emotions personality and social interactions and expectations. Within these domains, lie eight periods within human development. The lifespan development is divided into eight major periods of human development consisting of the infancy and toddler, early childhood, middle childhood, adolescence, early adulthood, middle adulthood, and late adulthood (Boyd Bee, 2006, p.7). Throughout life, a human will proceed through each stage. As the newborn grows into toddler, thinking, language, and personality characterize these individuals. In the middle years, family school and friends along with personality and cognitive skills become important. The transition of childhood to adulthood shows sexual development to be apparent leading to thoughts of marriage and career. As adults age the thought of retirement become apparent. Contemporary Concerns related to Lifespan Development Concerns related to lifespan development are nature versus nurture and continuity and discontinuity. For centuries, researchers thought changes in humans were due to forces whether inside or out. Contributions and experimental factors of biological processes are known as nature versus nurture (Boyd Bee, 2006, p.7). Those who are on the side of nature believe that children are born with certain behaviors that are innate and are inborn biases. These patterns may be the product of genetic or their prenatal environment. Either way, babies are not born as blank slates. For those who lean toward nurture, the effects of certain experiences depend on the individual’s perception. With continuity and discontinuity, the debate is based on whether the age-related change is primarily a matter of amount or degree or type or kind. A child’s number of friends differs depending on age. The age related differences are categorized as universal, group specific and individual changes (Boyd Bee, 2006, pp, 9-11.). Children progress gradually through different stages of cognitive development. Intelligence and personality traits throughout childhood can merge into adulthood. This continuity has room for change. A child appearing intellectual can lose this trait if they become abused and neglected. All humans experience universal change. This change is unique to a certain age. The group specific changes tend to occur in those with similar cultural and historical experiences. While individual changes are due to genetic factor and the timing of experiences, everyone is unique to his or her own genes such as physical characteristics, genetic disorders intelligence and personality (Boyd Bee, 2006 pp. 9-11). Conclusion The science of life-span development continues to evolve over the years making development a lifelong process. Longevity has increased and many have begun to realize the importance of each age period of life. Through interaction with their physical environments and loving parents, children progress towards milestones. Individuals become unique and throughout life, people are shaped by the time and energy invested. As time goes by, people change and display different patterns of change with age. Research Papers on Life-Span DevelopmentThree Concepts of PsychodynamicInfluences of Socio-Economic Status of Married MalesPETSTEL analysis of IndiaOpen Architechture a white paperThe Fifth HorsemanRelationship between Media Coverage and Social andGenetic EngineeringBionic Assembly System: A New Concept of SelfAnalysis of Ebay Expanding into AsiaEffects of Television Violence on Children

Tuesday, November 5, 2019

Get Access to 200+ Grammar Exercises and Quizzes

Get Access to 200+ Grammar Exercises and Quizzes Get Access to 200+ Grammar Exercises and Quizzes Get Access to 200+ Grammar Exercises and Quizzes By Daniel Scocco When we launched the DailyWritingTips Pro subscription six months ago, our main goal was to create a resource our readers could use to improve their English and writing skills. The feedback we received far exceeded our expectations, so it seems we are on the right track. The main part of the Pro subscription are the exercises and quizzes. Subscribers get a new exercise every day, and they also get access to the archive of over 200 interactive exercises that have been published already. Here are some of the topics our exercises and quizzes cover: -Pronoun Usage -Confused Words -Irregular Verbs -Prepositions -Comma Usage -Hyphenation -Wordiness -If Clauses -Nominalization -Compound Nouns -Possessives -Verb Tense -Capitalization -Dangling Modifiers -Expletives -Colons and Semicolons -Subject-Verb Agreement -Quotation Marks -Parallel Constructions -Misspelled Words -Idiomatic Expressions -Redundancy -Prefixes and Suffixes We offer a 15-day free trial, so you have two weeks to try everything out completely free, and only then decide whether or not the subscription is right for you. Click here to get all the details and join! Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the General category, check our popular posts, or choose a related post below:100 Idioms About NumbersWhat is the Difference Between Metaphor and Simile?9 Forms of the Past Tense

Sunday, November 3, 2019

Global War on Terror Assignment Example | Topics and Well Written Essays - 1000 words

Global War on Terror - Assignment Example The refusal of the world’s foremost nuclear superpower to join the moratorium on nuclear testing sent a strong signal to would-be nuclear powers: if the US reserved the right to test these weapons, why shouldn’t others? (Spanier and Hook, 2007) US also refused to sign Ottawa convention calling for a worldwide ban on land mines, whose primary victims were in war-torn developing countries. Retreat from multilateral became even worse when the republican George Bush became president in 2001. He was not ready to mend fences with the international community. Instead of working through formal organizations such as UN ornate, US form coalition of willing on case by case basis and dismantle them when the mission is accomplished. Bush withdraws from Antiballistic Missile Treaty (ABM) despite protest by Russian leaders and warning by strategic analysts of a new global arms race. His dismissal of the Kyoto Protocol and failure to propose a more rigorous alternative despite earlier pledges to do so incited widespread criticism from abroad. This lead UN Human Rights Commission to deny US a seat on the panel on may 2001 for the first time (Spanier and Hook, 2007). In my opinion, these policies are not appropriate. They are hindrance to US war on terror. The policy is not appropriate since the war on terror should be a corporate responsibility of all of the international organizations and therefore it requires their good will. QUESTION TWO Describe the concept of â€Å"asymmetric warfare† (p. 280). In what ways should the War on Terror be considered an asymmetric conflict? (Be specific.) What are the advantages and disadvantages of the US and its opponents in the War on Terror? Asymmetric warfare is described as a conflict deviating from the norm, or an indirect approach to affect a counter-balancing of force. The disadvantaged power must push its unique advantages or successfully exploit particular weaknesses of the enemy in order to have any anticipation of prevailing. War on terror is consider asymmetric conflict because the terrorist advocates for followers using terrorist technique to retain support in home country and to win over the people occupying it in order to stop the principal support base partisans. Advantages It enables the USA in getting support from other countries. Help USA of being not accused against committing war crimes in Afghanistan and Iraq. USA was only too pleased to be able to tell the world that it was helping the freedom loving people of Afghanistan (Huntington, 1993). Disadvantages Terrorist organizations have used asymmetric warfare concepts mainly when setting up operations against Western supremacy forces. Terrorist make use of local tribal forces in attacking civilian populations and devastate food supply infrastructure in order to make a humanitarian aid catastrophe which would sluggish Western coalition forces (Huntington, 1993). QUESTION THREE Describe the Bush Doctrine's grand strategy of primac y and preemption. To what extent is this strategy new? In your opinion, is this the correct course for the US at this time? Explain. Bush message upon taking office in 2001 was that US would be concern primarily with its own interests and would go it alone to secure this interest whenever necessary. Bush claims that he is fighting against terrorism globally. His strategy which amount to Bush

Friday, November 1, 2019

Discussion 8 part B Essay Example | Topics and Well Written Essays - 750 words

Discussion 8 part B - Essay Example sattva of Compassion’, the figure is claimed to have been sculpted using a special technique called ‘yosegi’ which gave most creation of the era, 794-1185 AD, its distinct characteristic, chiefly made of wood carved into form out of the several fragments of wood. The assembly when examined in detail, may be observed to have been artfully crafted by a number of specialists or artisans with the finest skills. Such endeavor justify how this particular bodhisattva could, in a way or another, reflect the prevailing theme at the time in which Japan took pride in its genius through the fields of religion, philosophy, art, and rich literature. Though the ‘Eleven-Headed Bodhisattva of Compassion’ primarily consists of wood, the sophisticated carvings and the countenance which appears to possess a blend of gold and bronze external coating, aimed to bring about a wholly essential color, suggests subtle prominence while depicting the purpose of identifying a bodhisattva by nature. The smooth lines of the sculpture were fashioned such that the strokes exude a character with humble gesture, one with which no trace of rigidity can be detected. In the absence of conspicuous edges in its shape all throughout, the eleven-headed Kannon may be readily claimed to have been so intentionally brought to the gentlest of forms so as to align the overall look of the structure with the attribute or definition the ‘Eleven-Headed Bodhisattva of Compassion’ is. With the manner it was rendered through carving, it occurs naturally deserving of an equivalent sentiment apart form all anxieties as it effortlessly projects a n image of pure and complete tranquility. A sound critic may truthfully infer that the eleven-headed Kannon was created by an author whose hands well communicated with the mind that synergistically functioned with the heart by virtue of passion and wisdom which entailed total discernment of his work. Knowing the essence of a bodhisattva, which is substantiated in

Wednesday, October 30, 2019

Kants Ethical Theory Essay Example | Topics and Well Written Essays - 500 words

Kants Ethical Theory - Essay Example He rejects the belief of dogmatic philosophers like Leibniz and his followers that human reason could acquire knowledge of supersensible entities. Kant was more comfortable with the notion of secular morality and eschewed the idea propounded by Leibniz that religion was essential to establishing social order. Metaphysics, according to Kant, could not provide empirical evidence of the supersensible, like God. Kant’s disciples, such as Fichte, used his work as a springboard for German idealism, and he quickly condemned such for being too radical. The difference between autonomy and heteronomy is that an autonomous will is self-legislating while a heteronomous will is one where the acts of the self are directed by external rules. According to Kant, if an action is to be considered as genuine, then it should emanate from the self, or should be the result of autonomous will. Kant’s formulation of the categorical imperative is as follows: â€Å""Act only according to that maxim whereby you can at the same time will that it should become a universal law." This means that when an individual decides to act a certain way as dictated by his autonomous will, he must aspire that such action will be the universal norm and that he is setting a rule for others to follow in the future.

Sunday, October 27, 2019

Subcontractors

Subcontractors 1.0 Introduction Wikipedia (2009) defined subcontractor as â€Å"an individual or in many cases a business that signs a contract to perform part or all of the obligations of another’s contract†. Other authors, Gerald N. Hill Kathleen T. Hill (2005) defined subcontractor as â€Å"a person or business which has a contract with a contractor to provide some portion of the work or services on a project which the contractor has agreed to perform†. Generally, a subcontractor performs his work under a contract with a main contractor who is hired by the employer. In building construction, a main contractor usually hires a subcontractor to perform a specific task such as roofing, plumbing, electrical, cement work and plastering, as part of the overall project. Hence, if the main contractor does not pay for the subcontractor, then the subcontractor has the right to enforce a â€Å"mechanic’s lien† on the real property upon which the work was done to collect. There are three types of subcontractor that is: Nominated subcontractor (Specialist subcontractor) Domestic subcontractor Named subcontractor Nominated subcontractor is essentially selected or appointed by the employer for some specific works. If the employer wants to nominate a subcontractor for an element of work, then he will instruct the main contractor to use the nominated subcontractor through the architect. The element of work usually is the engineering package such as piling, structural frame or some ME services works. In this kind of subcontract, there is a direct contractual relationship between the employer and the subcontractor. On the other hand, domestic subcontractor is selected and appointed by the main contractor who is hired by the employer. The domestic subcontractor doesn’t have the direct contractual relationship with the employer but he contract with the main contractor. Domestic subcontractors usually execute the part of work from the main contract and supply or fix the materials and goods. The employer will not involve in the election of this kind of subcontractor and the main contractor take the responsibility of the subcontractor. The Named subcontractor is contractually same as the domestic subcontractor. However, the different between them is the employer states that which contractor is acceptable without take responsibility for their final selection and appointment. Chapter 2: Forms of Contract 2.0 Forms of Contract 2.1 Review the method of appointing specialist subcontractor JCT 98 The JCT 1998 is the pre JCT Form which was used when selecting and choosing the subcontractor. There are two types of subcontractor in this form of Building Contract which are Nominated subcontractor and Domestic subcontractor. In the JCT Form, except the Employer, the Architect has the highest authority in making decision. Nominated subcontractor is essentially appointed by the Architect or the Employer when they need the subcontractor in some specific works. Daniel Atkinson (1999) defined nomination as â€Å"sub-letting sections of the work allowing the Employer full involvement in choosing the company early and using the subcontractor’s expertise for design or coordination†. There are some reasons that the Employer nominated a subcontractor (Daniel Atkinson, 1999): The Employer can select any company that he likes to be his subcontractor without based on the price. The subcontractor’s design expertise and his knowledge can be utilized due to he can be involved early. Since the specialist subcontractor involves, the Contractor will not waste his time on some particular work which the Contractor does not expert in it. The Employer can understand his responsibilities clearly since the clear contractual liability is established. Delay in time can be prevented by the direct links and involvements are established. According to the Jennie Price (1994), the procedure of nominating a subcontractor under the Standard Form of JCT 1998, Clause 35.4: The Architect sends the both of invitation to tender in part 1 of the standard form of tender, NSC/T, and the relevant section of the employer/ nominated subcontractor agreement, NSC/W, together with the drawings/specification/bill of quantities which describe the work, to those companies the employer wishes to invite to tender. Then the tenderers complete the standard form of tender (part 2 of NSC/T) and the relevant sections of the warranty, NSC/W, and return both documents to the Architect. The Architect chooses the subcontractor, and arranges for the Employer to sign the selected subcontractor’s tender to confirm his approval of it, and to execute the warranty, NSC/W. The Architect nominates the subcontractor to the main contractor using the standard nomination instruction, NSC/N. He also sends the main contractor a copy of the invitation to tender and the successful subcontractor’s tender, the drawings/specification/bills of quantities on which the tender was based, and the executed warranty. After received those documents, the main contractor has the right of reasonable objection to the selected tenderer within 7 days. If he does not object, he must reach agreement with the selected tenderer on the ‘Particular Conditions’ set out in Part 3 of NSC/T. These include the subcontract period, insurance details and the identity of the adjudicator and trustee stakeholder. When agreement on the Particular Conditions has been reached, the main contractor and subcontractor sign Part 3 of NSC/T, and execute the subcontract articles of agreement, NSC/A, which incorporate by reference the subcontract conditions NSC/C. The main contractor sends a copy of the signed NSC/T Part 3 and the executed NSC/A to the Architect for his records. 2.2 Review the method of appointing specialist subcontractor JCT 05 JCT 2005 Form of Building Contract (with quantities) has been updated, amended, merged and retired most of its important contracts. This form was set out in clear, understandable, and well-ordered for the user and it had simplified on wording such as change the word â€Å"Determination† to â€Å"Termination†. There is a little deviation between JCT 1998 and JCT 2005 regarding to the subcontracting. In this form of Building Contract, the nomination of subcontractor has been omitted. According to the Chappell D. (2007), there are a lot of problems arise between the main and subcontractor since a project is not ready for the subcontractor to start his work on the anticipated date. Due to the delay of the commence work, the subcontractor may argue and claims for more money. On the other hand, Ndekugri I. and Rycroft M. (2009) stated that JCT 1998 had extensive provisions on nominated subcontracting but due to the bad experience from the inherent pitfall of nomination of subcontracting and its complexity, the provision has been omitted in JCT 2005. There are three principles of appointing a subcontractor under the JCT 2005 Form of Building Contract: Consent to sub-contracting (Clause 3.7) According to this clause, main contractor cannot appoint or subcontract whole or any part of works to anybody without the Architect’s or the Contract Administrator’s consent. However, the Architect also cannot withhold or delay his consent unreasonably. If the Contractor insists to sub-letting his works to anyone without consent, then the employer entitles to terminate the Contractor’s contract under clause 8.4.1.4. Besides that, under the clause 3.7.2, the contractor cannot subcontract the design portion to anyone without the Employer’s consent. Lists in Contract Bills (Clause 3.8) Under this clause, annexations of lists of subcontractor to work packages which are defined in the Contract Bills are required. Clause 3.8.2 has stated that the list of subcontractor must not less than three persons. Then the Architect has to choose among the three persons to be the subcontractor. It is similar as pervious clause that the Architect cannot withhold or delay his consent unreasonably. If the Contractor submitted the list which less than three persons, then either: The Employer and the Contractor shall by agreement add the names of other persons to make sure the list comprises not less than three persons; or The Contractor carries out the works by himself. Conditions of sub-contracting (Clause 3.9) The subcontract shall state the condition that upon the termination of the Contractor with any reason, then the employment of the subcontractor will be automatically terminated too under the Clause 3.9.1. Besides that, the subcontract shall provide that subcontractor cannot remove the site materials which have been delivered to the works without the Contractor’s written consent except for use on the works. If the materials or goods have been paid by the Contractor, then they will become the Employer’s property and the subcontractor cannot deny it. On the other hand, if the Contractor has paid the subcontractor for any site materials before their value is included in the Interim Certificate, then the materials will become the Contractor’s property. Under the Clause 3.9.4, if the Contractor fails to make the payment to the subcontractor, then the Contractor shall pay simple interest to the subcontractor until the payment is made. Then according to the Clause 3.9.5, the Contractor could get the warranty from the subcontractor for his execution of works within 14 days of receipt of a written request by the Contractor. If the subcontract comply the three principles above, then the Architect could select and choose among the three persons in the list to be the domestic subcontractor. 2.3 Review the method of appointing specialist subcontractor NEC 3 ECC 05 The NEC 3 ECC 2005 is essentially used by Government for public works such as road, bridge etc. In JCT Form, the Architect has the highest authority while the Project Manager has the highest authority in this NEC 3. He plays an important role in this Form of Building Contract especially in subcontracting. The Project Manager is the person who approves the appointment of the subcontractor by the Contractor. In other words, the Project Manager dominates in the selection of subcontractor. Under the Clause 26.1, the Contractor still takes the responsibility to the works even though he had subcontracted the works to the Domestic subcontractor. Therefore, the Contractor must select the subcontractor carefully in case of the omission of the subcontractor. However under the Clause 26.2, the subcontractor who has been proposed by the Contractor must be accepted by the Project Manager. If the Project Manager does not accept the subcontractor, then the Contractor cannot appoint such subcontractor. Under the Clause 26.3, the Contractor has to submit the proposed conditions of contract for every subcontract to the Project Manager for his acceptance and approval unless an NEC Contract is proposed. Besides that, if the Project Manager agreed that no submission is required then the Contractor is not need to submit it. This clause also stated that the reasons that the Project Manager does not accept the subcontractor who is proposed by the Contractor are: The subcontractor will not allow the Contractor to provide the works. The subcontractor does not include a statement that the parties to the subcontract shall act in a spirit of mutual trust and cooperation. Chapter 3: Reasons of why Nomination has been stopped 3.0 Reasons of why Nomination has been stopped In the opinion of Jennie Price (1999), the disadvantages toward the main contractor are some of the reasons that the nomination has been stopped. The Main Contractor will lose his right to choose his favorite subcontractor to carry out the part of works. He would hard to communicate with the subcontractor who is nominated by the Employer thus cannot cooperate well. Since the Main Contractor is forced to employ the subcontractor so he is unable to impose his own terms and conditions which are more commercially advantageous to him. Other than that, the Nominated Contractor is normally difficult to be managed and controlled since their direct link with the professional team and the Employer. They will not easily listen to the Main Contractor on the design works due to the works are their expertise. Since some of employer will repeat the business with the nominated subcontractor, then the said nominated subcontractor will monopoly in this industry. Other subcontractors will not have chance to receive the job and make them suffer in their incomes. On the other hand, quality of the works might be dropped due to some nominated subcontractors handle few projects in the same period. They cannot concentrate on a single project and make the quality of every works will be dropped. 3.1 Advantages and Disadvantages toward the Employer Jennie Price (1999) agreed that Nomination provides some advantages and disadvantages toward the Employer which are shown as below: Advantages to the Employer: The Employer is able to select the person whom he wishes to carry out the subcontract works. Through the warranty NSC/W, the Employer has the direct contractual link with the subcontractor. It can covers matters such as design or materials selection by the subcontractor. Disadvantages to the Employer: The Employer has to take the risks and bear the responsibilities on the Nominated subcontractor due to his omission of works. If any defaults have been found, then the Employer should bear the extra costs. There are no rights against the main contractor in the event of defective design by the Nominated subcontractor. The Main Contractor entitles to claim Extension of Time if the progress of the main contract works is delayed by the Nominated subcontractor. Besides that, he could also claim for the Loss and Expenses due to the delay of works which is caused by the subcontractor. Since the Main Contractor does not take any responsibility on the Nominated subcontractor, there may be lack of management of the progress of the works on site of the subcontractor. 3.2 Opinion for the new appointment procedure of subcontractor In my opinion, the new specialist subcontractor/supplier appointment procedures are more complex to render the duties of the Architect / Project Manager / Quantity Surveyor. This is because the design teams have not direct contact with the subcontractor. All the instructions which are given by the design teams are passed through the Main Contractor. That might be appeared some mistake in the communication. By the way, the design team also cannot directly manage the subcontractor since the subcontractor only contract with the Main contractor. Chapter 4: Conclusion 4.0 Conclusion After the research, we will know that the procedure of nomination in JCT Form 98 and the reasons for nomination under this Form. Then we know that no more nomination under JCT Form 05. We also get the three methods that appoint a specialist subcontractor in JCT Form 05. NEC 3 ECC 2005 is only for the government works and the Project Manager has the highest authority in this Form. As a conclusion, nomination provides some disadvantages to the Main contractor such as difficult to cooperate between them and the main contractor cannot impose his own terms and conditions to the subcontract. Besides that, the main contractor is usually hard to manage the nominated subcontractor because he has the direct link with the professional design team. Other than that, nomination will make the monopolies arise in the construction industry due to the repeat business between the nominated subcontractor and the Employer. Quality of the works is low since the subcontractor cannot concentrate on single project. The Employer needs to bear the risks and take the responsibilities on the nominated subcontractor. Hence, nomination has been stopped. Finally, in my opinion, there are a lot of benefits that nomination has been stopped since there were a lot of disadvantages. Chapter 5: References Atkinson D. (2009), Sub-Contracting. [Online]. Last accessed on 24th July 2009 available at http://www.atkinsonlaw.com/cases/CasesArticles/Articles/SubContracting.htm CHAPPELL, David (2007). Understanding JCT Standard Building Contracts Eight Edition, Abingdon, Taylor Francis. Gerald N. Hill Kathleen T. Hill (2005), Subcontractor [Online]. Last accessed on 24th July 2009 available at http://legal-dictionary.thefreedictionary.com/Subcontractor NDEKUGRI I. and RYCROFT M. (2009). The JCT 05 Standard Building Contract Law and Administration Second Edition, Oxford, Butterworth-Heinemann. PRICE, Jennie (1999). Sub-contracting under the JCT Standard Forms of Building Contract, London, Macmillan Press LTD Wikipedia (2009), Types of Subcontractor [Online]. Last accessed on 24th July 2009 available at http://en.wikipedia.org/wiki/Subcontractor#Types_of_subcontractor Bibliography Barnes P. and Davies M (2008). Sub-contracting under The JCT 2005 Forms First Edition, Oxford, Blackwell. GERRARD, Robert (2005). NEC2 and NEC3 Compared. Great Britain, Bell Bain. ME Contractor Magazine (2005), what sort of subbie are you. [Online]. Available at http://www.eca.co.uk/IndustryGuidance/CCandL/Download/WhatSortOfSubbieRU.pdf